Siphon cabinets, also know as suction cabinets, use much less compressed air and are generally smaller units making them perfect for smaller workshops or lower productivity environments. Siphon cabinets uses a compressed air stream inside a siphon blast gun to create a vacuum in a chamber creating a negative pressure, pulling the abrasive into the nozzle.

A Blast Cabinet is a unit where an abrasive blasting process is utilized inside a closed loop system. Unlike the conventional blast pots, the cabinets allow the operator to blast the workpiece, keeping the spent abrasive contained inside protecting the operator and surrounding area while recycling the abrasive continuously.

Available Abrasive: Mesh 36-220 aluminium oxide, glass bead, zircon sand, carborundum, silicon carbide and etc.

Model	Operating Zone Size(mm)	Overall Size(mm)	Fan	Air Consumption（Approx）
DISA9060A	900x600x600	900x1000x1600	550W	0.8-1.2m³/min
DISA1010A	1000x1000x800	1000x1500x1700	550W	0.8-1.2m³/min

DISA blast cabinet is suitable for less demanding users who still expect reliable and high-quality blasting cabinet. Widely used in,

① Removing rust, mill scale, heat treatment scale, and carbon build up from metals;
② Strip paint, powder coating, plating, and anodizing from parts for rework;
③ Eliminate burrs, parting lines, flashes, and other defects from castings and injection-moulded parts;
④ Remove residual sand from castings;
⑤ Beautify steel, stainless steel, aluminium, brass and other metals with a uniform satin finish;
⑥ Etch artwork and apply lettering on glass, stone, plastics, metal and other materials;
⑦ Clean release agents and material build up from moulds.