Wet Blasting (vapor blasting) is a non-aggressive surface prep technique that has been specifically developed for applications requiring finer finishes. Combining a thin film of water with fine blasting media, this technique can remove dirt, contaminants, rust, corrosion, and old paint from a wide range of surfaces.

It is to put abrasive in water, water and abrasive mix, by using the a sludge pump to draw the mixture to the blasting hose, and with the help of compressed air, force a powerful jet flow to hit on product surface through venturi nozzle, to achieve the purpose of cleaning the surface and polishing.

Wet blasting provides extremely consistent and reproducible surface treatment to clean, degrease, descale etc. or polish various products of various geometry and material (from plastic and soft metals to steel or exotic materials) without the use of harsh chemicals or dusty mechanical action. Widely used in automobile parts refresh, sand blasting medical parts.

Model	DISA9065W Wet Blast Machine	DISA1010W Wet Blast Machine	DISA1212W Wet Blast Machine
Fabricate Material	Stainless Steel SUS304	Stainless Steel SUS304	Stainless Steel SUS304
Operating Zone L*W*H	900*650*750mm	1000*1000*750mm	1200*1200*750mm
Machine Size L*W*H	900*950*1700mm	1000*1450*1800mm	1200*1650*1800mm
Entrance Door Size	W500*H590mm	W600*H840mm	W800*H900mm
Power Supply	1.5kw	1.5kw	1.5kw
Air Consumption (Approx)	1.5m³/min; Pressure 3-7bar(kg/m²)	1.5m³/min; Pressure 3-7bar(kg/m³)	1.5m³/min;pressure 3-7bar9kg/m³)
Nozzle	1pc; diamater 8mm	1pc; diameter 8mm	1pc; diameter 8mm
Load Capacity	60Kg	60kg	100kg
Machine Lighting	18W	18W	18W
Total Weight (Approx)	350kg	450kg	550
Abrasive Available	Glass bead, sand, aluminum oxide etc	Glass bead, sand, aluminum oxide etc	Glass bead, sand, aluminum oxide etc